Dataloggers and Recorders
Chemglass Life Sciences PT100 Sensor, Constructed with Shielded Cable, the Lemo Connector Provides An Area for a Ground Connection, PFA Coated, 1/4" OD x 26" Long, Style "B", Fits Reactor Capacity: 10-20L
PT100 Sensor, Constructed with Shielded Cable, the Lemo Connector Provides An Area for a Ground Connection, PFA Coated, 1/4" OD x 26" Long, Style "B", Fits Reactor Capacity: 10-20L. PT100 RTD temperature sensor is for direct insertion into flasks and process reactors using any O-Ring style compression adapter, such as the CG-1042-E. Probes are constructed using shielded cable to ensure a clean signal. Style ¿B¿ has a Lemo Connector direct wired to a 12 foot lead and is for use with all Huber circulators permitting process temperature control based on the contents of the reactor. Sensor is constructed using GREEN shielded wire/cable. Lemo connector can be used as a ground for the probe using an optional grounding clip and wire. An adapter having a female Lemo connector to the 2-blade mini plug is available to allow use of the ¿Style B¿ sensors with equipment having this connection.
Lascar Electronics Inc Dual Channel Temp, RH & Dew Point Data Logger with External Probe, Graphic Screen and Audible Alarm
This dual channel data logger measures and stores over 250,000 temperature and relative humidity readings using up to two external temperature & humidity probes*. It has user-programmable, audible alarm thresholds with confidence/alarm LEDs. Its high contrast, dot-matrix LCD with three face-buttons for navigation gives real-time trend analysis, data summaries and the ability to start, stop and restart the data logger without connecting to a PC. EasyLog USB software enables quick configuration and data download via the USB port. Supplied with two lithium batteries, which can typically allow logging for up to 1 year. It can also be powered from USB.Logging rates between 10 seconds and 1 hourStores over 250,000 readings per channel for temperature and humidityUser triggered logging modeUp to two channels supported (supplied with one probe)*only one probe is included with the device.
Lascar Electronics Inc Dual Channel High Accuracy Thermistor WiFi
This WiFi-enabled dual channel data logger can remotely monitor an environment using two high accuracy thermistor probes. Supplied with two Type A probes, its measurement range out of the box measures from -40 to +125°C (-40 to +257°F). Data is uploaded periodically using a standard WiFi network to the EasyLog Cloud or a single host PC. EasyLog Cloud gives access to each data logger, and data collected from any internet-enabled device. Change data logger settings remotely, receive email alerts of alarm conditions, link sensors from multiple sites into one account and assign multiple user privileges.The device will store data internally if it loses WiFi connection and automatically uploads it to the Cloud once reconnected.Use the EasyLog Cloud Apps for Android and Apple to easily setup your device and access your data anytime, anywhere.
Electron Microscopy Sciences Omniprobe AP250 Tungsten Probe Tip
Custom tip designed from tungsten. Tip radius is < 0.5um with 6 degree taper angle for maximum lifetime service. Compatible with Short-Cut system for direct conversion to TEM grid.
Cobex Recorders Inc Chart Recorder Paper, 7-inch, 7 Day, 50/Pack
Rotation Speed: 7 Day ; Range: -100 to +38
Cole-Parmer Graphic Controls Replacement Chart Recorder Pen for DR4300, Red, Channel 2; 6/Pk
Optimize performance of your Graphic Controls chart recorder with different pen styles and colors to fit a wide variety of recorders and applications.
AVANTOR MASTERFLEX (VWR LLC) PENDOTECH SINGLE-USE PRESSURE
PendoTech Single-Use Pressure Sensor, Non-Sterile, Polycarbonate, 1/2" Hose Barb
Electron Microscopy Sciences Alpha/Numeric Index Grid, Copper
By employing a rectangular mesh, the support value of the grid has been increased, offering a value intermediate between the most commonly used grid (200 Lines) and (300 Lines). Each grid rectangle is asymmetrical having different outlines in all four corners. This allows for the orientation of the grid to be determined at microscopic levels. The index feature enables the position of each grid to be identified with reference to the letters A-O along the horizontal axis and the numbers 1-15 along the vertical axis. The logo in the rim allows for precise orientation and aids in the identification of each side.
Material: Copper